Connect to Shoutcast's new radio manager: https://radiomanager.shoutcast.com
1- Planner not activated
In your automation software or dedicated encoder, select "Shoutcast" (version 2, if available) and enter the settings you will find in your Shoutcast Radio Manager interface (via the settings / Connection page):
- Your stream server/host
- Your port
- Your stream ID
- Your stream password
Important: When setting your stream password in the RMO, do not include any colon or hash characters (: or #) in the password. See below for the reason why.
Tip
The connection mode (Server type) is Shoutcast v2.
However, if you use a legacy Shoutcast v1 encoder, there is no Shoutcast v2 option and no Stream ID field. So, select just the Shoutcast option and fill out your password field then add ":#" and your Stream ID (after the password).
Example: abcde:#123456
Example: abcde:#123456
2- Planner activated
You can broadcast live when the planner is activated, the information to connect live will be displayed in the same "Connection" section under "Settings".
The connection mode (server type) is Shoutcast v1

In order to broadcast live you must:
1 - Generate and activate a planning for the current day on the Radio Manager
2 - Have at least ONE listener connected to your radio
2 - Have at least ONE listener connected to your radio
3 - Send a stream in MP3 - 128 kbps (or less but no more) - 44100 Hz - Stereo
3- Additionnal Streams
To relay your additionnal streams, please refer to the stream page to get each streamID
